NA2XRY 2 x (10-300) mm² 0.6/1 kV

Al / XLPE / SWA / PVC
(Aluminium Conductor, XLPE Insulated, Galvanized Steel Wire Armor, PVC Sheathed)
Standard Specification : IEC 60502-1

Application

For installation in the ground, indoors, cable
trunking and outdoors if increased mechanical
protection is required or where high-pulling
stresses may occur during installation or
operation.


Special Features on Request :
• Oil Resistance
• UV Resistance
• Flame Retardant Cat. A, B, C
• Flame Retardant Non Category
• Anti Termite
• Anti Rodent
• Low Smoke Zero Halogen


Note :
Conductor Shape
10 - 16 sqmm supplied in non compacted circular stranded (rm) conductor shape
25 - 300 sqmm supplied in compacted circular stranded (cm) conductor shape

Standard Packing
10 - 150 sqmm supplied in wooden drum @ 1000 m
185 - 300 sqmm will be suplied in wooden drum on available length
Length Tolerance per drum ± 2%

Construction Data

Nom. Cross Section Area Overall Diameter Cable Weight
approx.
approx.
mm²
mm
kg/km
10
19.4 657
16
22.0 812
25
25.0 1,124
35
27.5 1,327
50
30.5 1,531
70
35.0 1,928
95
40.0 2,590
120
43.5 3,017
150
46.5 3,424
185
54.0 4,638
240
59.0 5,457
300
64.0 6,357

Electrical Data

Conductor Inductance Current - Carrying Capacity at 30° C * Short circuit current at 1 sec
Nom. Cross Section Area
DC Resistance at 20°C
AC Resistance at 90°C
in air in ground
(mm²)
Max. (Ω/km)
Max. (Ω/km)
(mH/km) Max. (A) Max. (A) Max. (kA)
10
3.08 3.949 0.248 71 78 0.94
16
1.91 2.449 0.236 95 102 1.50
25
1.20 1.539 0.242 125 131 2.35
35
0.868 1.113 0.234 154 158 3.29
50
0.641 0.822 0.232 186 187 4.70
70
0.443 0.568 0.229 235 229 6.58
95
0.320 0.411 0.224 288 274 8.93
120
0.253 0.325 0.223 333 312 11.28
150
0.206 0.265 0.225 375 347 14.10
185
0.164 0.211 0.225 437 394 17.39
240
0.125 0.162 0.223 513 455 22.56
300
0.100 0.130 0.222 585 511 28.20

*Further information about rating factor for certain cable arrangement can be found on supplementary technical information