NA2XRY 5 x (10-50) mm² 0.6/1 kV

Al / XLPE / SWA / PVC
(Aluminium Conductor, XLPE Insulated, Galvanized Steel Wire Armor, PVC Sheathed)
Standard Specification : IEC 60502-1

Application

For installation in the ground, indoors, cable
trunking and outdoors if increased mechanical
protection is required or where high-pulling
stresses may occur during installation or
operation.


Special Features on Request :
• Oil Resistance
• UV Resistance
• Flame Retardant Cat. A, B, C
• Flame Retardant Non Category
• Anti Termite
• Anti Rodent
• Low Smoke Zero Halogen


Note :
Conductor Shape
10 - 16 sqmm supplied in non compacted circular stranded (rm) conductor shape
25 - 50 sqmm supplied in compacted circular stranded (cm) conductor shape

Standard Packing
10 - 50 sqmm supplied in wooden drum @ 1000 m
Length Tolerance per drum ± 2%

Construction Data

Nom. Cross Section Area Overall Diameter Cable Weight
approx.
approx.
mm²
mm
kg/km
10
23.5 918
16
28.0 1,315
25
30.5 1,615
35
34.5 1,971
50
40.0 2,662

Electrical Data

Conductor Inductance Current - Carrying Capacity at 30° C * Short circuit current at 1 sec
Nom. Cross Section Area
DC Resistance at 20°C
AC Resistance at 90°C
in air in ground
(mm²)
Max. (Ω/km)
Max. (Ω/km)
(mH/km) Max. (A) Max. (A) Max. (kA)
10
3.08 3.949 0.248 68 72 0.94
16
1.91 2.449 0.236 93 94 1.50
25
1.20 1.539 0.242 123 122 2.35
35
0.868 1.113 0.234 151 145 3.29
50
0.641 0.822 0.232 185 172 4.70

*Further information about rating factor for certain cable arrangement can be found on supplementary technical information