NYRGbY 5 x (1.5-50) mm² 0.6/1 kV

Cu / PVC / SWA / PVC
(Copper Conductor, PVC Insulated, Galvanized Steel Wire Armor, PVC Sheathed)
Standard Specification : SNI IEC 60502-1 : 2009

Application

For installation in the ground, indoors, cable
trunking and outdoors if increased mechanical
protection is required or where high-pulling
stresses may occur during installation or
operation.

Special Features on Request :
• Tinned Coated Copper Conductor
• Fire Resistance
• Oil Resistance
• UV Resistance
• Flame Retardant Cat. A, B, C
• Flame Retardant Non Category
• Heat Resistance
• Anti Termite
• Anti Rodent
• Low Smoke Zero Halogen


Note :
Conductor Shape
1.5 - 10 sqmm supplied in solid (re) or non compacted circular stranded (rm) conductor shape
16 sqmm supplied in non compacted circular stranded (rm) conductor shape
25 - 50 sqmm supplied in compacted circular stranded (cm) conductor shape

Tinned Coated Copper Conductor
Electrical properties for tinned coated copper conductor will be submitted upon request

Standard Packing
1.5 - 35 sqmm supplied in wooden drum @ 1000 m
50 sqmm will be suplied in wooden drum on available length
Length Tolerance per drum ± 2%

Construction Data

Nom. Cross Section Area Overall Diameter Cable Weight
approx.
approx.
mm²
mm
kg/km
1.5 16.3 482
2.5 17.6 581
4 21.0 882
6 22.5 1,055
10 26.0 1,515
16 29.0 1,945
25 33.0 2,649
35 37.5 3,538
50 42.5 4,437

Electrical Data

Conductor Inductance Current - Carrying Capacity at 30° C * Short circuit current at 1 sec
Nom. Cross Section Area
DC Resistance at 20°C
AC Resistance at 70°C
in air in ground
(mm²)
Max. (Ω/km)
Max. (Ω/km)
(mH/km) Max. (A) Max. (A) Max. (kA)
1.5 12.1 14.478 0.328 24 28 0.17
2.5 7.41 8.866 0.304 32 37 0.29
4 4.61 5.516 0.303 43 49 0.46
6 3.08 3.685 0.288 55 60 0.69
10 1.83 2.190 0.269 75 80 1.15
16 1.15 1.376 0.255 99 104 1.84
25 0.727 0.870 0.255 132 133 2.88
35 0.524 0.627 0.246 163 160 4.03
50 0.387 0.464 0.247 197 188 5.75

*Further information about rating factor for certain cable arrangement can be found on supplementary technical information